Drive Modules

  • Weighted Take-Up Drive Module
    Weighted Take-Up Drive Module
  • SmartFlex Catenary Drive Module
    SmartFlex Catenary Drive Module

Catenary Drive Module
  • Lengths:
    • Minimum = 1.58′ (481mm)
    • Maximum = 50′ (15.24M)
    • Minimum tail only (knuckle modules, and plain bend corner) = 1.08′ (329mm) (contact factory)
  • Drive Sprocket:
    • 65mm = 16 tooth
    • 105mm and 150mm = 12 tooth
  • Pitch Diameter:
    • 65mm = 5.093″ (129mm)
    • 105mm and 150mm = 5.336″ (136mm)
      Maximum incline or decline = 7°
  • Uses catenary loop for belt take-up
  • Side mount sealed gearmotors can be in position 1, 2 or 3
  • Optional 20mm diameter x 1.5″ long dual output shaft for common driven conveyors
Weighted Take-Up Drive Module
  • Provides compact tail for in machine applications
  • Lengths:Minimum = 4.08′ (1,244mm)
    • Maximum = 50′ (15.24M)
  • Drive Sprocket:
    • 65mm = 16 tooth
    • 105mm and 150mm = 12 tooth
  • Pitch Diameter:
    • 65mm = 5.093″ (129mm)
    • 105mm and 150mm = 5.336″ (136mm)
  • Maximum incline or decline = 30°
  • Not available for friction top chain
  • Uses weighted idler roller and sight gauge for belt take-up
  • Take-up module can be located 18″, 24″, 36″ or 48″ from discharge end
  • Side mount sealed gearmotors can be in position 1, 2 or 3
  • Optional 20mm diameter x 1.5″ long dual output shaft for common driven conveyors
Catenary Drive Module with Outfeed Power Transfer
  • Power transfer for small part in-line transfer applications
  • Lengths:
    • Minimum = 1.58′ (481mm)
    • Maximum = 50′ (15.24M)
    • Minimum tail only (knuckle modules, and plain bend corner) = 1.08′ (329mm) (contact factory)
  • Drive Sprocket:
    • 65mm = 16 tooth
    • 105mm and 150mm = 12 tooth
  • Pitch Diameter:
    • 65mm = 5.093″ (129mm)
    • 105mm and 150mm = 5.336″ (136mm)
  • Maximum incline or decline = 7°
  • Power transfer is 10mm micro pitch chain slave driven off drive module
  • Transfer parts as small as 3″ in diameter
  • Uses catenary loop for belt take-up
  • Side mount sealed gearmotors can be in position 1, 2 or 3
Weighted Take-Up Drive Module with Outfeed Power Transfer
  • Provides compact tail for in machine applications
  • Power transfer for small part in-line transfer applications
  • Lengths:
    • Minimum = 4.08′ (1,244mm)
    • Maximum = 50′ (15.24M)
  • Drive Sprocket:
    • 65mm = 16 tooth
    • 105mm and 150mm = 12 tooth
  • Pitch Diameter:
    • 65mm = 5.093″ (129mm)
    • 105mm and 150mm = 5.336″ (136mm)
  • Maximum incline or decline = 10°
  • Not available for friction top chain
  • Power transfer is 10mm micro pitch chain slave driven off drive module
  • Transfer parts as small as 3″ in diameter
  • Uses weighted idler roller and sight gauge for belt take-up
  • Take-up module can be located 18″, 24″, 36″ or 48″ from discharge end
  • Side mount sealed gearmotors can be in position 1, 2 or 3

Manuals & Literature

Engineering ManualsPagesFile Size
Smartflex Engineering Manual4810.6 MB

 

LiteraturePagesFile Size
SmartFlex Brochure61.72 MB